Permanent Magnetic Chuck (WDS 5694)

Permanent Magnetic Chuck (WDS 5694)
Permanent Magnetic Chuck (WDS 5694)

Product selection

Download CAD

You must be logged in to access this.

Not registered? Register

Permanent Magnetic Chuck (WDS 5694) (Available) N/A - N/A Each

WDS 5694

Type - Magnetic Workholding Chucks

Used for small, medium and large workpieces.
Uninterrupted transverse pole arrangement. Constant holding force over the entire pole-surface area and along the side faces.
Laminations 0.5 mm brass / 1.4 mm steel.
Nominal holding force: 80 N/cm2
Magnetic field height: 6 mm
Pole plate wearing limit: 8 mm
Available with flushing channels for spark erosion applications.
*Without mounting slots, actuation with tie-bar on short side

Print

Available Sizes

Select part number to view prices and download 2D & 3D CAD models at the top of page

WDS No. Select A B C (+0.5/-2) D Weight
5694-243-01-1710 Select 175 100 49 147 7000 grams
5694-243-01-2010 Select 200 100 49 172 8100 grams
5694-243-01-2510 Select 250 100 49 220 13200 grams
5694-243-01-2513 Select 255 130 49 222 14500 grams
5694-243-01-1515 Select 150 150 51 115 9800 grams
5694-243-01-2515 Select 250 150 51 215 16400 grams
5694-243-01-3015 Select 300 150 51 265 19700 grams
5694-243-01-3515 Select 350 150 51 315 23000 grams
5694-243-01-4015 Select 400 150 51 365 26200 grams
5694-243-01-4515 Select 450 150 51 415 30000 grams
5694-243-01-3020 Select 300 200 51 267 26200 grams
5694-243-01-4020 Select 400 200 51 367 35000 grams
5694-243-01-5020 Select 500 200 51 466 43700 grams
5694-243-01-6020 Select 600 200 51 566 52400 grams
5694-243-01-5025 Select 500 250 56 464 58500 grams
5694-243-01-5030 Select 500 300 56 456 70200 grams
5694-243-01-6030 Select 600 300 56 557 84200 grams

Ask a question about this product

Are you a human?

Products like this